How to Remove the Radio From a Mazda 6? Mazda six is one of the most popular cars available in the market all over the world. Mazda six comes with a default factory audio system. This system is of very high quality and performance. There is no need to change the audio system in this car. But still people do change it to upgrade their audio system to have powerful stereo and speakers. In particular youngsters are mad about powerful audio system and speakers. So, in order to upgrade your default audio system in Mazda six car you have to first remove the default stereo present in it. If you go to a mechanic or an engineer they may demand you big amount of money. You can save money and your time by doing this work on your own.
This article lists you all the required things to remove the default audio system from your mazda six car and also it also explains the step by step procedure to remove the stereo safely from your car. The procedure mentioned below holds good only for the two thousand three to two thousand eight car models.
The things you will be in need are pliers, screw driver and socket wrench. Make sure you have screw drivers of different sizes. If you do not have screw drivers of different size then you may be stuck in the middle. Make sure all these things are ready before starting your work to avoid unnecessary wastage of time.
Get into your car. Make sure your car’s gear system is in neutral position. The engine is turned off and hand brake is applied. Parking brake is the other name of the hand brake. The negative terminal of the car’s battery is disconnected. The gear shifting knob is twisted counter clock wise direction and the knob is removed carefully. The center console is smashed and the cup holder is grabbed and removed carefully.
The glove compartment is opened to gain access to the side-mounted bold of the radio. The sides of this compartment are squeezed simultaneously, and are made to be dropped down. Once this is done, the screws that are seen can be removed.
The assembly of the climate control is entirely removed. This panel also includes the middle covers of the air vent. Once this cover is removed, it is turned over and the remaining screws twelve in number that mounts the radio with the air vent and other climate control are removed. When these screws are removed fully, the radio is free to be removed.
The entire assembly containing control and radio is unsnapped. You will find twelve screws once the covers are removed. These screws are removed carefully with appropriate screw drivers. Radio will pop out once the twelve screws are removed. The negative terminal is connected back.
Now the default factory radio is completely removed from your Mazda six car. You can fit your new audio system and test it. Once the new set is fixed your new audio system is ready to rock your Mazda six. Thus this article shows How to Remove the Radio From a Mazda 6 without much difficulty.
Learn more about Autoradioblende. Visite the Author’s page where you can find more details about radio mounting kits and what it can do for you.